A waterproof watch table head, the internal structure will have a waterproof seal apron, the table and the seal between the case is very important, because the table should always dial the needle winding, pull out and rotate to do a variety of adjustments, So, seal the apron more easily aging or worn. In fact, most of the parts of the watch water is also from the head position into the head, so the head is a "loss of parts", pay attention to the need for regular replacement. Europe and the United States and other developed countries watch the way of maintenance, probably ...

A waterproof watch table head, the internal structure will have a waterproof seal apron, the table and the seal between the case is very important, because the table should always dial the needle winding, pull out and rotate to do a variety of adjustments, So, seal the apron more easily aging or worn. In fact, most of the parts of the watch water is also from the head position into the head, so the head is a "loss of parts", pay attention to the need for regular replacement.

Europe and the United States and other developed countries watch the way of maintenance, probably every time will change the table head, this thing is also estimated that the value of two money, specifically to see what the table. At present, the country has not yet reached this level, most of the table head, basically are "from the end" of the. I have seen a lot of wear bad head, has no plating, even the lines have been polished, but still do not replace.

Table head is also an important part of the appearance of the watch, will be printed on the watch brand LOGO logo, the surface material to the most common stainless steel, in addition, there are ceramic, gold-plated, gold and so on, a Some high-end brand name, but also the table head inlaid with precious stones or diamonds (such as CARTIER), so the shape of the table form has become the characteristics of some watches and representatives.

Gold-plated table head is the most rugged, and most likely to be worn, not simply because of the winding, dial needle caused by the usual prominent table head and human wrist skin contact, coupled with human sweat corrosion, First, the coating will fall off, it will not look good. So, even if the quartz watch, the watch is rarely used, but there will be surface of the table head surface corrosion situation.

Watch the daily maintenance of a very important one, that is, the table, the accident will fall to the ground on the table, the table head may be touched crooked, which has an impact on the winding up, followed by the damage to the head of the waterproof seal performance , Resulting in the watch is not waterproof.

In order to extend and ensure that the head of the head of the seal and waterproof performance, some watches will be in the table head inside the O-ring outside, plus a wire hoop, I have seen, such as the early ENICAR watch, that is, , Then the ENICAR watch Swiss boss is very proud of it

Generally speaking, with stainless steel and relatively large table head, from the use and life are better. The smaller the table head more bad operation, especially in the mechanical watch when the chord, which feel more uncomfortable.If you are gold-plated, it is recommended that you can always apply a little transparent nail polish on its surface, or wear the watch table up to reduce the friction between the head and the wrist skin and contact. To be able to often put a little silicone oil between the head of the table and the head of the case, it is also an effective way to guarantee lubrication and waterproof performance.

Stainless steel table head do not have to pay attention, but in the initial purchase of the choice of watches, it is best to take a large table to the. For the table head with inlaid diamonds or precious stones, it should be careful not to wrist watch, and in the delivery of watches to do maintenance and repair time, be sure to ask repair shop, do not open the table, the diamonds To hurt. Some 18K white gold watch, long-term use, the table above the top of the rhodium coating was worn off, it will look a little yellow, so it is not recommended to buy 18K white gold watch watch.

Of course, the watch is to serve people, too care will also be unworthy, once found that the table head off the coating or wear serious, should not hesitate to change, which for the entire watch is a great advantage.